Digital 1 Haven

Aquarium Chiller 79Gal 1/3 HP Water Chiller for Hydroponics System Home Use Axolotl Fish Coral Shrimp 110V with Pump and Pipe

1,372.38 NIS

~~2,058.57 NIS~~ 1,372.38 NIS

Sale Sold out

Ships From United States

Quantity

【Premium Refrigeration Compressor】 - The compressor adopts r134a refrigerant, circulating cooling, environmental protection, and pollution-free. The temperature of the chiller can be controlled at 68℉-79℉ (20℃-26℃), allowing your plants to grow more luxuriantly and axolotl more freely. It also uses a corrosion-resistant pure titanium pump, which can achieve the best between fresh water and seawater.
【Effective Cooling System】- 2 cooling fans are designed to dissipate heat in time, increase the service life of the compressor and save electricity. In addition, there are a large number of cooling vents on the 2 sides of the chiller to speed up heat dissipation to keep the water in the fish tank always cool. Please leave 6 inches/15 cm of space around the chiller to ensure good air circulation.
【Silent operation】- The special noise-reduction design makes the compressor run very quietly, the low-noise operation will not affect your daily work and rest. And monitors the water temperature in real-time, when the water temperature is higher than the starting temperature, the chiller automatically runs to cool down. After power off and restarting, the chiller will continue to cool according to the original set temperature.
【Tolerance Setting】- Every chiller has a tolerance value setting (F1) of 1-60. For example, I set the starting temperature to 79°F and the tolerance value to 2, then when the chiller detects that the temperature of the chiller’s water is 79°F, the chiller will automatically run and cool down until the water temperature is 77°F. Repeat cycle to cool down.
【Suggestions for Use】- The cooling temp is affected by the ambient temp and the size of the fish tank. For example, the room temp is 77℉, using AL-160, the water with a capacity of 150L can drop to75-78℉. For 35 gal/132L is almost down to 73℉and if you want to drop below 68F, the water volume is recommended to be below 80L. If you want to achieve a better cooling effect, it is recommended to choose a larger model AL-300.

Water Volume：79gal/300L

Flow Rate：1/3 HP

Power：00W

Current：1A

Gross Weight：37.4lb/17kg

Pump Flow Needed：600-800L/H

Water Pipe：Inside diameter 12mm

The proper temperature is the prerequisite for the reproduction of aquatic organisms. Our chiller is ideal for adjusting the water temperature.


Cooling Fans & Vents Design The cooling fan and side vents are designed to dissipate heat in time, which can better maintain the chiller, save electricity and time, and keep the water in the fish tank always cool.	Pure Titanium Water Pump Corrosion-resistant can be used in fresh water and seawater, with a water delivery capacity of 600L per hour. Please heck and clean the water pump monthly to to make sure the water	One-Button Switch One-button switch design can easily and conveniently control the operation of the machine, you can choose to use or end according to actual needs.